Dimensional  Field Service Fiber Optic  Hand Tools  Hard Gage  Life Sciences  Pressure/Vacuum  RF Electronics  Temperature/Humidity  Torque/Mass

 

Fox Valley Metrology and Twin Pines Metrology, divisions of WESTport Corporation are able to offer its customers complete repair and calibration services on nearly all makes and models of electronic test and measurement equipment. Most calibration services can be performed in our lab or at your facility. We allocate personnel to handle solely equipment repairs and calibration. This provides us with the ability to lower our costs while generating faster turnaround time on our services. Our primary ISO/IEC 17025 standards laboratory provides the resources you need for the traceability for all of your lab standards. All repairs are quoted prior to completion, and will not exceed 50% of the cost of a replacement.

All technicians are supplied with laptop computers and portable printers for any on site requests. Also, technicians are equipped with DoDMIDAS and GIDEP CD-ROMS, which contain all military and some civilian calibration procedures. This enables the customer to receive accurate certifications and calibration labels at the time the job is completed. Most of Fox Valley Metrology's electronic calibration technicians have been trained in the military with years of extensive calibration and repair experience.

     

Electronic Calibration and Repair

 

Accelerometer	Ovens	Click this question box to quickly send us a question via email or call us directly at:   1-888-400-4243
Air Gages	Panel Meters
Ammeters	pH Meters
Analog Volt, Ohm & Amp Meters	Power Supplies
Bridges	Pressure Gages (Air & Liquid)
Cable Tensiometers	Profilometers
Capacitance Meters	Rectifier
Clamp-On Meters	Resistivity Meter
CMM’s	Resistors
Conductance Meters	Roundness Testers
Conductivity Meters	Scales/Balances
Contracers	Shadowgraph Comparators
Data Loggers	Shunts
Deadweight Testers	Signal Generators
Decade LCR Box	Solder Guns/Pots Irons
Decade Resistors	Sound Level Meters
Digital Multimeters	Spectrophotometers
Digital Readouts	Spring Testers
Durometer Specimen	Standard Cells
Durometers	Standards (LCR)
ESD Floors and Mats	Static Meters
Film Thickness Gages	Stopwatch & Timers
Flow Gages (Air)	Strip/Chart/XY Recorders
Force Gages/Dynamometer	Stroboscopes
Frequency Counters	Supermicrometers
Function Generators	Surface Plates
Gauge Amps & Probes	Tachometers
Gaussmeter	Tensile Testers
Glass Thermometers	Thermal Couple/RTD
Ground Tester	Thermometers & Temp Controllers
Hardness Testers	Torque Calibrators
Hygrometers	Torque Sensors
Hypot Testers	Torque Testers/Analyzers
Inductors	Torque Watches
Ionizers	Torque Wrenches
LCR Bridge	ULM Calibration
LCR Meters	ULM Training
Load Cells	Vacuum Gages
Logic Analyzer	Variable Auto Transformers
Manometers	Vibration Amp
Meggers	Viscometers
Megohmmeter	Watt Meters
Microscopes	Weights
Multifunction Calibrator	Welders
Multimeter	Wrist/Foot Strap Testers
Optical Comparators	Z Meters
Oscilloscopes/Scopemeters	Zahn Cups

 

 

Fluke 5520A Multi-Product Calibrators A turnkey solution for calibrating today’s advanced 6.5 digit bench DMMs The Fluke 5520A builds on the 5500A's capabilities, extending its workload coverage even further. Its improved accuracy, expanded ranges, and capability to calibrate 5 1/2 and 6 1/2 digit multimeters can cover virtually all your high-performance workload, including: Handheld and bench meters (analog and digital) up to 6 1/2 digits Thermocouple and RTD thermometers Process calibrators Data loggers Strip and chart recorders Watt meters Power harmonics analyzers Current clamps and clamp meters Analog or digital handheld and bench oscilloscopes (with options) Panel meters Graphical multimeters Power meters, disturbance analyzers, power quality monitors, recorders and other power quality related equipment (with option)

 

 

 

HP 53132A Universal Counter

The Agilent 53132A universal counter has frequency resolution of 12 digits per second, 150 ps time interval resolution and a complete set of test and analysis features. The unit comes with two 225 MHz channels, and you can choose an optional third channel that measures up to 3 GHz, 5 GHz or 12.4 GHz.

 

 

Omega BB702 Infrared Temperature Calibrator

The BB702 Blackbody Calibrator is a high performance, rugged, portable calibrator for infrared pyrometers. The BB702 has a range from Ambient +10 to 215°C (Ambient +20 to 420°F) with an accuracy of ±0.5°C, ±0.25% rdg. The unit provides a heated target plate of known temperature and emissivity. Virtually any infrared pyrometer with a spot size diameter of 63.5 mm (2.5") or smaller can be calibrated. Both models come with an RS-232 computer interface which allows computer control of the setpoints for automatic test applications. An NIST traceable calibration certificate is also provided.

 

                                           MetCal 6.1 Automated Calibration Software

The MET/CAL Plus 6.1 suite of applications automates the operation and management of your calibration facilities, providing you with all the tools you need to:

• Perform automated calibrations, including computer-aided, closed-case and closed-loop  calibrations on all kinds of test and measurement tools and equipment including RF and microwave instruments
• Create, edit, test and document calibration procedures, with thousands of procedures to get you started, and hundreds more available from Fluke and Fluke software partners
• Calculate and report measurement uncertainty consistent with international standards
• Access information over the Internet
• Track asset information including calibration and maintenance history and status, traceability, users, customers and location
• Analyze and report asset information; produce certificates and reports
• Make data available to other corporate systems
• Meet the requirements of quality standards like ISO 9000, ANSI Z540, ISO/IEC 17025, FDA GMPs, NRC 10 CFR and others

 

PS System with Local Rubidium Oscillator

 The HP 58503A GPS Time and Frequency Reference Receiver maintains frequency accuracy of better than .000000000001, even in the presence of Selective Availability. This performance, combined with the unit's low cost, makes it an attractive lab alternative compared with more expensive cesium and rubidium solutions.

 

Dry Well Temperature Calibrator   

The Ametek Dry Well Temperature Calibrator is ambient to 600° C/1100° F. The Calibrator is also monitored with a platinum RTD Probe.

 

 Brooks 1051-5 Flow Calibrator

 

The Brooks Automatic Gas Calibrator is capable of measuring a selected volume of gas up to a maximum capacity of 24,000 cubic centimeters per minute. Gas flow is collected in a precision-bore glass cylinder under a mercury sealed piston.